Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Step -1: Slide component 4, 5, 6 and then 7 over the console
cable. Keep them loose. Do not tighten them yet. 2 cable glands
are provided for cable diameter from 3.5 to 5.8 mm. Choose the
one that best fits the cable.
Step-2: Solder the conductors with the copper
wires according to the pin assignment. The
soldering side view of the pin is shown as below:
Step-3: Fasten the components
4, 5, 6 and 7 in sequence. Be
sure the gasket is on the right
position. See the below M12
assembly diagram:
3.3 Assembly of Ethernet Patch Cables
You can connect terminal devices and other segments via twisted pair cables. Ports which
are not assigned should be closed with the covering caps contained in the package list of
delivery to guarantee the connector is clear without rust.
Never install or work on/with the equipment or the
!
cabling during the period of its lightning activity.
Console port pin assignment
1. Assembly part 1 and 4,
ensure the solder pins are
protected by part 4-gasket,
then locking part 1 and 5.
3. Locking part 5 and 7.
2. Insert part 6-seal into part 5.
4. Finalized
Publicité
