FIBARO Home Center Lite Mode D'emploi page 18

All manuals and user guides at all-guides.com
Add devices
After creating the rooms you can start
adding the devices.
Select "Devices" from the main menu.
Select the "Add or remove device" option from the left
side menu. Click "Add" to start adding a new device
(learning mode).
Add or remove device
The menu will count down the time (30 sec
by default) for you to add a new device to
the Z-Wave network (inclusion).
Note that the device needs to be located
within direct range of the Home Center Lite
during the inclusion process.
Please refer to each device's manual for
further information on how to include it into
the Z-Wave network.
NOTE:
Danger of electrocution! If you are not sure
how to connect a device to the wires,
please contact a qualified installer.
Rooms
15
Devices Scenes