Manhattan 178150 Manuel D'instructions page 4

Initial Setup
Connecting
You can connect the headphones two ways to enjoy audio:
•
Create a wireless connection to a mobile device or computer that features Bluetooth
wireless technology (see Bluetooth Pairing below); or
• Use the shorter plug on the included 3.5mm stereo cable to connect (J) to an audio source
(and add the 14mm transfer cable if it's not an Apple device). Play/Pause, Volume +/– and
Previous/Next work only during Bluetooth wireless operation.
Built-in Battery Charging
Prior to initial use as a wireless headset, the built-in battery needs to be charged. The first
two full charges can take up to 12 hours; just 3 hours after that.
1 Use the included USB-to-micro USB cable to connect the headset (G) to a powered computer.
2 The LED (D) flashes red and blue while charging and turns off when the charge is
complete.
Bluetooth Pairing
This product utilizes the latest in Bluetooth wireless technology; but wireless performance
can vary from device to device. If using this product with a Mac or PC, ensure that your
Bluetooth driver is up to date. If it isn't, visit your computer manufacturer's website for details
and updates.
1
Press the Multifunction button (B) for about 5 seconds. The LED (D) alternately flashes red and
blue for about 3 minutes. During this time, pair the headphones with your Bluetooth device.
2
Referring as needed to the manual of your phone, tablet, computer, etc., activate your
device's Bluetooth function and search for Bluetooth devices. Note: Be sure that you are
familiar with the Bluetooth operation of your source device.
3 Once the device finds "manhattan fusion, " an on-screen prompt will ask if you're ready for
pairing. Click or press OK or Confirm to continue. Note: If the device prompts you to enter
a PIN, enter 0000 and click or press Yes or Confirm to continue.
• After a successful connection is made, the LED (D) will flash blue once every 5 seconds.
• The effective Bluetooth wireless range of the Fusion is approximately 10 m / 33 ft. If you're
unable to connect the headset to a device:
- Make sure that the headset is fully charged, switched on, paired with the device and
indicating a successful connection.
- Make sure the device's Bluetooth function is activated.
- Check that there are no obstructions such as walls or other active wireless items between
the two devices that could interfere with the signal.
Power on Press the Multifunction button (B) for about 5 seconds. The LED (D) alternately flashes red and blue.
Power off Press the Multifunction button (B) for about 3 seconds. The LED (D) lights both red and blue with an
audio confirmation.
Play / Pause Briefly press the Multifunction button (B) to play or pause music.
Volume +/– Press + (E) to increase the volume. Press – (F) to decrease the volume.
Previous Briefly press
Next Briefly press
Answer / End a call Briefly press the Multifunction button (B).
4
ENGLISH • FUSION WIRELESS HEADPHONES
Quick Reference Guide
I
(A) to play the previous song in a playlist.
tt
I
(C) to play the next song in a playlist.
uu