Publicité
Les langues disponibles
Les langues disponibles
Electronical consideration
CONTACT ARRANGEMENT
The EFFI-Smart is supplied with a 24V constant voltage. Power consumption = 15 W for the 6 LED version, 30 W for the 12 LED version and 80 W
for the 36 LED version.
Pin
Cable
Contact arrangement
Number
color
1
Brown
2
White
3
Blue
M12 Male
4
Black
connector
5
Grey
MODE
AIC pin
NPN pin
Not connected
Not connected
≠0V
≠0V
Not connected
< 1.5Vdc
≠0V
See DIMMING
Not connected
CONTROL Scheme
≠0V
> 3Vdc, max
> 3Vdc, max
24Vdc
24Vdc
(1) : LEDs are supplied with Imax during 2s then with 40% of Imax
DIMMING CONTROL
0V < U
< 3V
→
LED OFF
AIC
3V < U
< 10V
→
≈40% < I
AIC
LED
10V < U
< 24V
→
LED ON 100%
AIC
LED INDICATOR
All manuals and user guides at all-guides.com
Double row LED bar
Max current: 0.65A / 6LED ; 1.25A / 12LED ; 3.5A / 36LED
M12 Female
connector
PNP pin
> 3Vdc, max
24Vdc
Not connected
≠0V
Not connected
≠0V
> 3Vdc, max
24Vdc
CHARACTERISTICS OF THE PULSE – PNP STROBE CONTROL
< 100%
A thermal security will trigger if the device gets too hot (long use at maximum power or duty cycle too
strong, approx 20%).
Green LED ON: Power Supply Connected
Red LED ON: Default Temperature at 65°C
Do not touch the product ! Please wait 5
minutes before handling the product again.
Mini Parc du Verger – Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
Designation
Power supply : +24V
NPN (triggered on falling edge) - max 24V
Max consumption = 0,1 mA
GND
PNP (triggered on rising edge) - max 24V
Max consumption = 2 mA
Analog Intensity Control: 0-10V - Max 24V
Consumption = 1mA @10V & 2mA @24V
Mode
Auto-strobe
(1)
Strobe control triggred on rising edge
Auto-strobe
Strobe control triggered on falling edge
(1)
LED OFF: 0V - 3V, ON: 3V (20%) – 10V (100%) & ON: 10-24V
Dimming
LEDs are supplied with Imax until Default Temperature is
activated. Do not use with external trigger, just for
Test mode
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: contact@effilux.fr
USER'S GUIDE EFFI-SMART
Version 2.1.2020
Last update: June 17, 2020
Designation
@100%
continiuous
Signal Consumption = 4mA
Do not touch the product ! WARM !
Designation
Rise time
(T
)
M
Response rise time
(T
)
RM
Fall time
(T
)
D
Response fall time
(T
)
30 (20 : NPN)
RD
Orange LED ON: Mode
Mode
Frequency
PNP & NPN
Flash at the light frequency
AIC
Flash at 1 Hz
TEST
Flash at 6 Hz
Time (μs)
10
30
10
Page 3 / 4
Publicité
