EFFILUX effiSmart Mode D'emploi page 2

Reference
EFFI-SMART
Maintenance
Regardless of maintenance, the product must be switch off.
The product is ESD sensitive. Should you open it, take care about ESD matters (use a conductive wrist strap attached to a good
earth ground, use an approved anti-static mat to cover your work surface).
CHANGE OPTICAL CONFIGURATION
P0 : Without lens
Option →
(Scheme: P1 configuration)
To handle the optical components, wearing gloves is strongly recommended.
To clean the optical components: Use compressed air duster if there is dust.
To remove marks on the lens or the window, just a drop or two wiped of alcohol-based lens cleaning fluid in a gentle circular motion with a cleaning
tissue. Always apply the fluid to a tissue rather than to the lens itself.
All manuals and user guides at all-guides.com
Double row LED bar
-WW
Number of LED
6
12
36
P1 : screw + 2*spacer + lens
Mini Parc du Verger – Bâtiment E
1 Rue de Terre Neuve
91940 LES ULIS, FRANCE
-XXX -YY
Wavelength (nm) Windows
405 TR (Transparent)
465 SD (Semi-diffusive)
525 OP (Opaline)
625
850
000 (White)
P2 : screw + spacer + lens +
spacer
1
2
Screw
3
4
2 Spacers
5
Lens
6 Screw the block of lenses & the cover
Tel: +33 9 72 38 17 80
Fax: +33 9 72 11 21 69
Email: contact@effilux.fr
USER'S GUIDE EFFI-SMART
Version 2.1.2020
Last update: June 17, 2020
-ZZ
Lens position
P0 (no lens)
P1 (45°)
P2 (25°)
P3 (10°)
P3 : screw + lens + 2*spacer
Unscrew the screws
Take out the plastic cover
Unscrew the screws on the block of lenses
Take out the 2 spacers
Replace the lenses in the right position
-...
Option
LS (linescan)
POL (polarizer)
Torx Screwdriver
Size : T6
0.2 N.m
Page 2 / 4