IPC Soteco FOX Manuel D'instructions page 19

3.5 Adjust the suction power
The suction power is maximal with the
sliding valve is closed and minimal
when all open. Adjust the suction
power by putting the sliding valve in
the desired position.
4. Service and maintenance
 Store the machine indoors and in a
dry environment.
 Clean the machine surface with a
dry cloth or a damp cloth with a
little cleaning agent.
 Order original accessories from a
local dealer.
 Service – contact your local dealer.
4.1 Recycling and scrapping
Recycle the wrapping and scrap the
machine according
recommendations
authorities. Cut the cord as short as
possible to avoid someone getting
injured on the scrapped machine.
4.2 Environmental commitment
This machine is designed with the
environment in mind. All plastic parts
due marked for recycling.
All manuals and user guides at all-guides.com
to
from the local
4.3 Responsibility
Soteco disclaims all responsibility for
all damage caused by incorrect use or
modification of the machine.
4.4 Filter change
The pre-filter (11) and post-filter (6)
can be worn and need to be replaced.
For cleaning of post-filter see 3.4
Pre-filter (11) change:
1. Turn off the vacuum cleaner
2. Remove the plug from the wall
socket
3. Remove the head from the
tank
4. Position the head upside down
5. Remove the 4 screws fixing the
filter frame to the head
6. Remove the filter
7. Insert the new filter into the
filter frame and place it on the
head
EN
19