Publicité
Les langues disponibles
Les langues disponibles
Attach the Motor hood & the Seat │ 9
1. Fit the motor hood over the motor.
2. Insert two
Ø4x12 screws and tighten.
only: Repeat for the other side.
2WD
3. Fit the tabs on the seat back into the grooves on the rear of the vehicle.
4. Use a screwdriver to tighten the two screws on the seat into holes the vehicle body.
Tabs on seat back
4
4
3
-10-
2
x4
1
Publicité
