Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Note: adjustable thermostat not included.
This heater is intended to be wall mounted and is for indoor use only. The heater has
a thermal cut-off protection. If the thermal cut-off protection trips then, switch off the
power. The unit should reset automatically after 10 minutes. If the thermal cut-off
protection trips again, determine the reason for overheating.
MOUNTING THE RECESS BOX
1. Ensure to keep the unit at least 8" (20.3 cm) away from any adjacent surfaces,
ceilings and the floor. This minimum distance must be maintained (Fig. A).
2. Once the mounting position is decided, ensure the opening space in wall with
minimum 17" (43.1 cm) H x 9.5" (24.1 cm) W x 4"(10.2 cm) deep for the recess
box.
Note: the location of wiring access on recess box has been shown on Fig. B
-
Ensure the recess box flanges are flush with the wall surface.
3. Attach the recess box with the screws.
4. Remove the electric knockout and secure the wire by using the strain relief
connector and leave 6" (15.3 cm) of wire leads in the recess box.
MOUNT THE HEATER
1. Insert the heater into the recess box and lock in place with provided screws.
- 4 -
Publicité
