Publicité
Les langues disponibles
Les langues disponibles
Before Installation Begins
Failure to read and follow all instructions carefully could cause personal injury and/or
property damage.
NOTE: All wiring must comply with national, local, and state codes.
Mounting Recommendations
• Install thermostat on an interior wall approximately 5 feet above the floor
• Place away from drafts or direct sunlight
• Do not install behind doors or other objects
Electrical Specification
• Input Voltage — 22 VAC to 26 VAC (24 VAC typical)
• AC Line Frequency — 50/60 Hz
• WiFi — 802.11 b/g/n 2.4 GHz
Wiring Diagram
Use 18 AWG or larger for normal wiring applications.
NOTE: Four wires are required.
Wire units in a "daisy chain" and not in a "star" configuration.
The order of the devices in the network is not specified except the EcoNet Smart Thermostat should
be at one end of the network.
R
E1
E2
C
OUTDOOR UNIT
Terminal
R
Power - 24VAC
C
Common / Ground - 24VAC
E1
EcoNet Communications Bus Wire 1
E2
EcoNet Communications Bus Wire 2
> Return to Table of Contents
All manuals and user guides at all-guides.com
R
E1
E2
C
INDOOR UNIT
Function
R
E1
E2
C
ECONET
SMART THERMOSTAT
EcoNet
Smart Thermostat Quick Start Guide
®
R C S1 S2 E1 E2
S1
S2
OPTIONAL REMOTE
TEMPERATURE SENSOR
7
Publicité
