Publicité
Les langues disponibles
Les langues disponibles
7.STORAGE AND DISPOSAL
7.1 STORAGE
Long-term storage - If you will not be using the unit for an extended
period of time (more than a few weeks) it is best to clean the unit
and dry it out completely.
Please store the unit per the following steps.
1.Unplug the unit.
2.Empty the water tank and dry with a cloth.
3.Clean the filter and let the filter dry completely in a shaded area.
4.Collect the power cord at the tank and re-install it.
5.Re-install the filter at its position.
6.Preserving the machine in ventilating, dry, non- corrosive gas and
safe place indoors.
7.The unit must be kept in upright position when in storage.
ATTENTION: The evaporator inside the machine has to be dried out
before the unit is packed to avoid component damage and molds.
Unplug the unit and place it in a dry open area for days to dry it out.
Another way to dry the unit is to set the humidity point more than 5%
higher than the ambient humidity to force the fan to dry the
evaporator for a couple of hours.
7.2 DISPOSAL
Cautions: Switch off the unit and unplug it immediately if anything
abnormal happens. Then contact a qualified electrician.
WARNING!!!
Releasing refrigerant into atmosphere is strictly
forbidden!
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information
regarding the collection systems available. If
electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
14
TROUBLE SHOOTING
1.FUNCTIONING TEMP
5℃/41℉ ≤ Ambient Temp.≤ 35℃/95℉
When the ambient temp is lower or higher than the functioning temp,
the dehumidifier stops.
When 5℃/41℉ ≤ Ambient temp≤ 16℃/61℉, the compressor
automatically defrosts at intervals; during defrosting, the compressor
stops and the fan keeps running.
2.BEFORE CALLING FOR SERVICE
Before contacting professional service, please review the trouble
shooting list that includes common occurrences that are not the
result of a defect in workmanship or materials.
Problem
Possible Cause
No power supply
Water Full Indication
Not
Flashes
working
Room temperature ˂
5°C/41℉, or ˃ 38 °C/100
℉
Is the air filter clogged?
Bad
functioning
Is the intake duct or
discharge duct
obstructed?
No air intake
Is the filter clogged?
Is the machine put in the
plat place?
Loud noise
when running
Is the filter clogged?
Solution
Connect to a functioning outlet
and switch on
Drain water tank and reset it, or
re-position the water tank to right
place
Self-Protection designed to protect
the unit. Can not work under such
temperature
Clean the air filter as instructed
Remove the obstruction from the
discharge duct or intake duct.
Wash the filter
Put the machine on the plat ground
Wash the filter
15
Publicité
