3. INSTALLATION
3.1 LOCATION
1. Place the unit on a firm, level surface in an area with at least
30cm/12" of free space around it allow for proper air circulation.
2. Never install the unit where it could be subject to:
•
Heat sources such as radiators, heat registers, stoves or other
products that products that produce heat.
•
in an area where oil or water may be splashed
•
Direct sunlight
•
Mechanical vibration or shock
•
Excessive dust
•
Lack of ventilation, such as cabinet or bookcase
•
Uneven surface
06
3.2 OPERATING THE DEVICE SAFELY
•
Check the device after unpacking for any damages or scratches
on it.
•
Operate this unit in an ambient temperature from 5°C to 35°C/41
℉-95℉.
•
Do not use outdoors. This dehumidifier is intended for indoor
residential applications only.
•
Do not operate in close proximity to walls, curtains, or other
objects that may block inlet and outlet.
•
Keep the air inlet and outlet free of obstacles.
•
If tipped more than 45°, allow the unit to set upright for at least
24 hours before start up.
•
Keep doors and windows close for better energy saving.
•
Do not operate or store the unit in direct sunlight or rain.
•
It is normal for air outlet to feel warm to touch after continuous
operation on hot days.
•
Empty the water tank before moving dehumidifier.
•
Make sure the Water tank is correctly fitted otherwise the unit
will not operate properly.
•
The dehumidifier starts up in the mode selected when the unit
was last used.
•
The dehumidifier starts dehumidifying if the room humidity is 3%
higher than the selected humidity.
•
There is a protective 3-minutes time delay of the compressor.
Wait 3 minutes for the dehumidifier to resume dehumidification.
07