Front Panel Features - Numark KMX01 Guide D'utilisation Simplifié

1.
DJ Mic 1: This section has the gain
and tone controls for the ¼"/XLR
combination mic input.
2.
Mic 2: This section has the gain and
tone controls for Mic 2
3.
Mic 3: This section has the gain and
tone controls for Mic 3
4.
Mic 2&3 Echo: This knob controls the
echo effect amount on microphones 2
and 3.
5.
Mic 2&3 Delay: This knob controls the
delay time of the echo effect on
microphones 2 and 3
6.
Line Faders: Control volume levels in
the mix.
7.
Master Fader - Controls the overall
output level.
8.
Input toggle switch - Selects which
source will be live to that channel based
on what you have connected to the rear
panel input section
9.
Replaceable Crossfader - This slide
fader blends audio between channels 1
and 2. This also switches the video
when using compatible karaoke CD+G
CDs.
Note: The crossfader is user replaceable
in case of failure. Simply unscrew the

FRONT PANEL FEATURES

10.
11.
12.
13.
14.
15.
16.
17.
18. Headphone Jacks – Used to connect
4
two large screws which hold it in place,
lift it out and disconnect it's cable. Re-
attach the new crossfader and screw
the mounting plate back onto the unit -
you're back in business!
Fader Start – Activation allows you to
start the CD players from you
crossfader. Travel from left to right will
start the right CD player and pause the
left CD player
LED METER - Indicates the Master
output level.
Stereo/Mono toggle - Changes the
Master output between Mono and
Stereo
Master EQ Bass
Master EQ Middle
Master EQ Treble
Channel Cue Selector - Used to route
channel audio to your headphones.
Headphone Level – Adjusts cue
volume.
either 1/8" or 1/4" plugs for audio
monitoring with headphones.