Milwaukee 48-22-8590 Manuel De L'utilisateur page 4

FF
GG
HH
II
JJ
KK
LL
MM
NN
OO
Installing the Frame
1. Ensure all station drawers are securely locked into
place using the key lock on the station.
2. Lay the bottom tray frame down. Use the packag-
ing material to protect the finish.
3. Attach the posts one at a time to the bottom frame
using four screws (AA) per post.
NOTE: Position the posts so that the bottoms show
four holes, and the tops six.
AA (x4)
4. Lay the top tray frame upside down. Use the
packaging material to protect the finish.
5. Attach the bottom tray frame with posts to the top
frame using six screws (AA) per post.
Nylon Washer
M18 x 8.5 x 1.5
Washer
M12 x 6 x 0.8
Nut M6
Screw M4 x 16L
Bolt (with Plastic)
M6
Cord Storage
Bracket
Rubber Bumper
Swivel Caster
with Brake
Rigid Caster
Hexagonal Head
Bolt M6 x 25L
4
2
2
12
1
AA (x6)
2
CAUTION
6
1. Mount the two swivel casters with brake to the
station using four screws (BB) and washers (CC)
per caster. The swivel casters with brake should be
2
installed on the end of the station with the power
strip and side handle.
2. Mount the two rigid casters to the opposite end of
2
the station using four screws (BB) and washers
(CC) per caster.
3. Tighten all bolts securely with a wrench.
2
4. Return the station to its upright position.
Installing the Side Handle
1. Attach the side handle to the station using one
screw (EE) secured by two nylon washers (FF),
one washer (GG) and one nut (HH) per side.
4
Installing the Casters
Do not overtighten the screws.
NN
NN
OO
EE
BB
CC
MM
GG
HH
FF