Satco NUVO 65/639 Instructions D'installation

EMERGENCY BATTERY BACKUP
FOR LED ROUND CANOPY LIGHTS
Model: 65/639
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• To reduce the risk of personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards
read all warnings and instructions included.
• Before installing, servicing or performing routine maintenance on
this equipment, follow these general precautions.
• Commercial installation, service and maintenance of luminaries
should be performed by a qualified licensed electrician.
If you are unsure about the installation or maintenance of the
luminaries, consult a qualified licensed electrician and check
your local electrical code.
• Do not make or alter any open holes in an enclosure of wiring
or electrical components during kit installation.
• Turn OFF electrical power at fuse or circuit breaker before
wiring fixture to the power supply.
• All connections should be capped with UL approved wire
connectors.
• Keep away from any corrosive substance.
• Use a dry cloth when cleaning fixture.
• Not suitable for use in wet locations.
INSTALLATION
STEP 1: Mount the Emergency Battery Backup near to
the fixture.
STEP 2: Disassemble the fixture lens and reflector. See
Figure 1.
STEP 3: Remove a knockout from the fixture body nearest
the Emergency Battery Backup. See Figure 1.
STEP 4: Feed all wires into the fixture body. Connect wires
as shown in the Wiring Diagram. NOTE: For 24/7 applications
without a switch, connect the AC-L (Red) and AC-L (White)
together to the AC-L circuit.
STEP 5: Assemble the lens and reflector back to the fixture
body. See Figure 2.
Figure 1
Figure 2
© Copyright 2023 Satco Products, Inc. 6/23 v1.1
Emergency
Driver
15W
24-7 Circuit
Switch
L
L
(Black)
24-7 Circuit
N
(White)
N 12V+(Black＆White）
Dim+(Purple)
G
G (Green)
Dim-(Pink)
LED Driver
Emergency Function
Luminous Charging
Flux Time
2000lm
>24 Hours
WIRING DIAGRAM
Emergency power supply box
Emergency
battery
Emergency
power indicator
(Black)
8
1 (Red)
7
(Blue)
6
(White)
(Pink)
2
5
(Brown)
Emergency power
(Green)
4
controller
V+(Red)
V+(Red)
V-(Black)
V-(Black)
Sensor
PG05
Emergency
Time
>90 Minutes
Vo+
Vo+(Gray)
VL-
VL-(White)
VH-
VH-Blue）
CCT
Satco Products, Inc.
Brentwood, NY 11717