Publicité
Les langues disponibles
Les langues disponibles
8. Wind lines around spool in direction
shown by arrow on spool top. Wind
line until four inches of line remains
outside the spool.
9. Thread exposed trimmer line into
holes on spool housing. Replace spool
onto spool spring and press spool
down (see Figure 4-17).
Figure 4-17: Replacing spool into spool housing
118336
10. Align tabs on spool cover with slots
in spool housing. Replace spool cover
onto spool housing and snap into
place (see Figure 4-18).
Figure 4-18: Replacing spool cover onto spool housing
REMINGTON® ELECTRIC TRIMMER |
9
Publicité
