PDP Snap Remote Manuel D'instructions page 2

WARNING
All manuals and user guides at all-guides.com
Before using this product, carefully read this
•
manual and keep it for future reference.
Additionally, read the instructions for the
PlayStation 4 system.
®
Do not handle damaged or leaking batteries.
•
WHAT YOU CAN DO WITH THE
SNAP REMOTE
• The Snap Remote uses Bluetooth
technology to operate your PS4
to control the playback of common types of
media, including Blu-ray Disc
PREPARING FOR USE
Remove the battery cover on the rear of the
Snap Remote and insert 2 AAA batteries. Make
sure the batteries are in the correct position.
OPERATING THE PS4
Check the PS4 system software version
™
To use the Snap Remote, the PS4
software must be version 3.0 or later. You can
check the system software version by selecting
Settings -> System -> System Information.
Pairing the Snap Remote with a PS4
This operation is performed only once, when you
are using the Snap Remote for the first time.
1. Turn on the PS4
™
2. Using a connected controller, select
Settings -> Devices -> Bluetooth Devices
from the PS4 system menu.
™
3. Press the PS button once to active
the remote.
4. Next, press and hold the SHARE button and
the PS button simultaneously until the red LED
begins to flash.
SHARE &
PS button
LED
wireless
®
system and
™
media.
™
SYSTEM
™
system
™
system
™
system.