Kiwi KFAN 7640 Mode D'emploi page 7

BEFORE USE
• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from
the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never
use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device
matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
PARTS DECRIPTION
3
1
1. Spray cap
2. Corrugated hose
3. Front grill
4. Screw (ST3*7.5)
5. Net clamp
6. Blade nut
7. Blade
8. Guard nut
9. Rear grill
TECHNICAL DATA
Diameter
Max. power consumption
MOUNTING
• Insert the connecting wire and the post into the main unit then tighten the fastening knob ensure to
drive the screw into the positioning hole.
• Press the wheels into the base.
• Put screw (M5 * 20) through the base, and fix the base to the main unit bottom.
• Mount the rear grill, grill nut, blade, blade nut and net clamp.
• Press the spray cap into the corrugated hose, and fix the spray cap with screws on the front grill.
• Mount the front grill into the net clamp, screw in the net clamp and then tighten the screws. Mount
the corrugated hose on the top of the main unit.
All manuals and user guides at all-guides.com
4 6 7
5
10. Post
11. Tightening knob
12. Main unit
13. Base
14. Wheels
15. Screw (M5*20)
16. Water tank
17. Control panel
18. Remote control
: 16 inch / 40 cm
: 90 W
8
9
2
17
18
15
7
KFAN 7640 User Manual
10
11
12
16
13
14