Lightcloud LCDAYLIGHT RCL Mode D'emploi page 5

Setup & Installation
Plug in the Daylight device (setup only)
1
To join Daylight to a Lightcloud network, plug it in with the included
Micro USB power adapter. The white Power Indicator will come on and
the Device Status Indicator will blink red every 10 seconds until it is joined
to your network. For setup purposes, you can plug the device in anywhere
that's convenient, but please stay near the location where it will be perma-
nently installed in order to ensure continued network connectivity. Once
setup has been completed, you can unplug the device and it will operate
exclusively on solar power—no batteries necessary.
All manuals and user guides at all-guides.com
Contact RAB to add your Daylight
2
Call us at 1(844) LIGHTCLOUD or email support@lightcloud.ca
and we'll get your Daylight device added to your Lightcloud network
immediately. When USB power is removed, it is normal for this LED
to be unlit.
DEVICE STATUS INDI CATOR