Cloer 700 Manuel D'instructions page 10

Technical Data
Type
700 220-240
Before the first use
• Read these operating instructions carefully before
using the appliance for the first time.
• Remove all packaging elements and stickers, but not
the rating plate.
• Place the electric food processor on a dry, flat, non-
slip surface.
• We recommend washing all the attachments with
warm soap water before the first use.
GB
• The whip driver should be hand washed in warm soa-
py water, rinsed and dried to maintain it's luster.
• The motor base should be only wiped with a damp cloth.
• All the attachments must be completely dried before
they are used in the appliance.
CE Label / Safety information
The appliance meets the requirements
of the applicable EC directives.
The appliance is designed for indoor
domestic use only.
ATTENTION! Always unplug the
appliance when not in use and before
cleaning.
Operation
• Place the mixer on a clean, stable work surface.
• Unwind or pull out the power cord.
• Plug the mains plug into the mains socket just when
all the necessary preparations have been made.
• Familiarize yourself with the motor speed switch, and
the rpms of each speed.
• There are six speed levels that ensure the control of
the mixing.
• In "0" the motor is off.
• The "p" position means Pulse and provides full power
while it is held in position.
• We recommend starting with a "1" speed and try
cautiously other levels.
10
All manuals and user guides at all-guides.com
Volt Hz
50-60
Overheating Protection
• The food processor has a safety cut-off switch to pro-
Watt
tect against overheating. If the motor is overloaded or
overheated, the thermal switch will stop the motor.
650
• To reset the mixer after an emergency stop, follow
these instructions:
- Remove the plug
- Turn the knob to zero (0)
- Wait at least 1 hour to allow the motor to cool completely
- Turn on the appliance again
- The function should be available again
Assembly
Drive shaft assembly in the bowl.
• Introduce the drive shaft into the bottom of the bowl
and rotate clockwise.
• To attach the mixing bowl securely, ensure that it
locks into place. Place the bowl on the motor base
and rotate counter-clockwise with slight downward
pressure. You will hear and feel it click into place.
• Make sure the bowl is correctly placed before using
the appliance.
• The wire whips are best used for:
- light dough without pieces like waffles
- creaming soft butter, cream, whipped egg whites
• The wire whips attach to the whip driver. Make sure
they are securely set. This whip driver fits down over
the bowl drive shaft. Prove everything fits correctly
before starting the motor.
• Switch to the dough hook when adding flour nuts, cho-
colate chips, raisins and other hard items to your dough.
Assembly of the wire whips
• The wire whips attach to the whip driver. Make sure
they are securely set. This whip driver fits down over
the bowl drive shaft. Prove everything fits correctly
before starting the motor.
• As attachment for the wire whips you can use the
bowl scraper.