Fagor LVF63ITB Mode D'emploi page 23

Tension adjustment of the door spring
The door springs are set at the factory to the proper tension for the outer door.
If aesthetic wooden panel are installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable
(see figure 5).
Door spring tension is correct when
the door remains horizontal in the
fully opened position
to a close with the slight lift of a
finger.
Tension adjustment
of the door spring
Connection of drain hoses
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the hose must be less than 1000mm.
Front
NOTE
The top of the hose
must be less than
1000mm.
All manuals and user guides at all-guides.com
yet rises
Figure5
PLEASE FIX THE DRAIN HOSE EITHER WAY OF A, B PLEASE FIX THE DRAIN HOSE EITHER WAY OF A, B
A
Drain pipe
20
B
40mm
Counter