Johnson JOR70CX Manuel D'instructions page 34

FAULT HANDLING
If the problem cannot be solved or other problems occur, please contact the
after-sales service.
The fault phenomenon
After cooking, the machine
still has the sound of working
(the sound of the fan
rotating).
There is a sound in the oven
cavity when the oven is
working.
The first use has an
unpleasant smell.
The machine was smoking.
The food is not cooked.
Furnace light not on.
TECHNICAL PARAMETERS
Model
Usable Volume
ECelectric, cavity (
ECelectric, cavity (
Energy efficiency class
Possible causes
Fan delay blowing, used for
heat dissipation.
1. The sound of a cavity expanding
by heat and contracting by cold.
2.
The furnace cavity is not
cleaned for a long time, which
accumulates a lot of grease.
Heating tube with
anticorrosive coating, heating
after melting smell.
1. Product failure damage.
2.
The furnace cavity has oil,
food residue, etc., not cleaned in
time.
1. The heating time is too
short.
2.
Oversized portions of
food.
The furnace lamp is broken.
JOR70CX
70L
) 0.79 kWh/cycle
) ---- kWh/cycle
A
Under normal conditions, food
can be taken out normally
without treatment;Do not unplug
the fan while it is in operation.
1. Belong to normal condition,
need not deal with.
2.
and furnace cavity with a
clean towel.
For the first use, please heat
the cavity in a well-ventilated
environment for half an hour.
1. Turn off the power and seek
after service.
2.
furnace cavity with a clean
towel
1. Prolong the heating time
appropriately.
2.
small
pieces or cook it multiple times.
Please seek after service.
Rated voltage
Rated frequency
ECelectric power
14
Processing method
Wipe the heating tube
Wipe the heating tube and
Break the food into
220-240V~
50Hz-60Hz
2.1 kW
V.1