Publicité
Les langues disponibles
Les langues disponibles
LIGHT REPLACEMENT
To Change Refrigerator Light
This model has special LED interior lighting
and service should be performed by a qualified
technician.
wWARNING
Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.
NOTE: Moving the control to the OFF position does
not remove power to the light circuit.
NOTE:
• Not all appliance bulbs will fit your refrigerator.
Be sure to replace the bulb with one of the same
size, shape and wattage.
• The light bulbs will turn off if door is left open for
seven continuous minutes. Shutting door for one
second will light bulbs to come back on.
16
To Change Freezer Light
1. Unplug refrigerator power cord form outlet.
2. Use a screwdriver to remove the cover screw.
(Save the cover screw)
3. Using a flat instrument,
gently pry the lamp cover
loose in the front as
shown. Rotate downward
to remove the rear tabs.
4. Make sure the bulb is
cool to the touch.
Turn the bulb
counterclockwise to
remove.
5. Replace with a new
60-watt appliance bulb.
6. Insert tabs on back of
cover into slots in freezer
ceiling. Push cover up to
snap front into place.
7. Use a screwdriver to assemble the cover screw.
wCAUTION
• DO NOT place fingers inside of cover.
Lamp may be hot.
Publicité
