Publicité
Les langues disponibles
Les langues disponibles
Notice!
1. It shall make sure the power is off for daily maintenance.
2. Do not touch the surface of the printing head with hands or metal parts,
and do not use tools like tweezers to scratch the printing head, printing rub-
ber roll and the surface of the sensor.
3. Do not use the organic solutions such as gasoline and acetone and so on.
4. Printing can be continued only after the absolute ethyl alcohol evaporates
completely.
Safety and Maintenance Instructions
- Do not use this product in a location with volatile substances such as alcohol or paint
thinner, or near a fire. Doing so may cause an electric shock or fire.
- Turn off your equipment immediately if it produces smoke, a strange smell or unusual
noise.
- Improper use can cause a fire. Unplug the equipment immediately and contact your
dealer or Approx technical service for advice.
- Never try to repair this product yourself. Improper repair work can be dangerous and
void the warranty.
- Never disassemble or modify this product. The handling of this product may cause
injury or fire.
- Be sure to use the supplied power adapter and connect the power connector correctly,
an incorrect connection may cause a short circuit.
- Do not allow foreign objects to enter the equipment. Penetration of foreign objects can
cause a short circuit in the device.
- If water or other liquid is poured into this equipment, do not continue to use it. Continued
use can lead to fire or electric shock. Disconnect the equipment immediately and contact
your dealer or the Approx technical service for advice.
- Do not use this product in an environment where flammable gas or explosive gas may
be present. Do not use aerosols containing flammable gas in or around this product.
Doing so can cause fire.
- Do not connect cables in ways other than those mentioned in this manual. Different
connections can cause equipment damage and burns.
- Do not touch the areas inside the product other than those mentioned in this manual.
Doing so can cause an electric shock or burns.
- Be careful not to drop this product. This may cause the product to break.
- Do not use it in places subject to high levels of humidity or dust. Excessive moisture and
dust can cause damage to the equipment.
- Do not place heavy objects on top of this product. Never stand or lean on this product.
Equipment may fall or collapse, causing breakage and possible injury.
- To ensure safety, unplug this product before leaving it unused for an extended period.
- Before moving the product, unplug it and unplug all cables connected to it.
- Do not use this product in places with high temperatures 60 ° C or more. Also, do not
leave or store this product in places that are 60 ° C or more. Doing so could cause heat,
smoke, ruptures, fire or leakage. Be sure to use within the limits of the environment and
respect its temperature conditions for use.
Publicité
