Publicité
Les langues disponibles
Les langues disponibles
RX510
Quick Start Guide
The following steps describe the quickest method to get your pressure washer up and
running. However, it is essential you read this manual to ensure you are familiar with the
safety features, precautions and functions necessary to operate the product. Failure to do
so may result in injury and damage to your washer or personal items.
ASSEMBLY
Insert the cable tidy hook into the machine
01. Fit the handle by aligning the screw holes
at the base of the handle to the top of the
washer unit. Tighten the two screws.
02. Fit the wheels by sliding the fitting into the
sockets on the side of the washer until
they lock securely.
03. Slide the hose tidy onto the back of the
unit.
All manuals and user guides at all-guides.com
© Wilks-USA
English
CONNECTION
08
03
02
04
01. Pressure
cleaner
02. Water supply
hose
03. Water
connection
04. Water inlet
05. High pressure
01. Attach the high pressure hose to the
pressure water outlet of the machine.
02. Attach the spray gun to the high pressure
hose. Prior to operating the machine
please ensure that the high pressure hose
has been completely uncoiled and do not
allow it to recoil during operation.
03. Mount the lance onto the spray gun and
add your desired nozzle.
04. Connect the machine to the water supply
hose and power supply.
05. Turn on water supply.
06. Turn on washer after water has entered
the unit.
07
01
09
05
06
hose
06. Water outlet
07. Spray gun
08. Power outlet
09. 9. ON/OFF Dial
* No. 2, 3, 8 are not
included
3
Publicité
