Klipsch KG-300 Manuel Du Propriétaire page 14

TRANSMITTER CONTROLS
4
6
5
7
2
3
1
8
9
All manuals and user guides at all-guides.com
11
10
1. Logo /Power Button
Press On/OFF
Press and Hold initiates Pairing Mode
Headset will automatically turn off if no audio is present for 10 minutes.
2. Power LED – Blue /Red LED
Blue LED on – unit is on and linked to transmitter
Blue flashing – Unit is in pairing mode
Red – On but not paired to the transmitter
LED off when unit is Off
3. Dolby Digital™ LED
Red = Dolby Signal is present and being Decoded
OFF = Dolby Signal is not present
4. Klipsch Spherespace Surround LED
Blue = Surround Processing is ON
OFF = Surround Processing is OFF
5. Mode Button with LED
Pressing the Mode Button Cycles thru the different operational modes. The modes
are Xbox, PS3 and PC
Green LED = Xbox Mode
Amber LED = PS3 Mode
Red LED = PC Mode
6. Headphone Volume Up - this is for headphone jack output on front of transmitter, does
not effect headphone volume of KG300. Press increases volume of headphone amplifier.
7. Headphone Volume Down - this is for headphone jack output on front of transmitter, does
not effect headphone volume of KG300. Press decreases volume of headphone amplifier.
8. Auxiliary Headphone Out - connect a passive headphone to listen to game audio
9. Digital Toslink Optical Audio Input Jack
10. Analog Audio Input - 3.5 mm Stereo Input Jack
11. USB power input jack