Publicité
Les langues disponibles
Les langues disponibles
RECORDING MODES
There are three different recording modes available: Manual, Continuous, and Motion Detection.
•
Manual Record
Start and stop recording anytime manually. Press the
to stop recording.
•
Continuous Record
Schedule a start and stop time, and the DVR will record continuously during the set time period.
•
Motion Detection Record
Set a time period to record only when movement is detected. Motion detection will start recording when
movement is detected and exceeds a preset motion detection threshold. (See Motion Detection Setup
Pg. 12 for more information)
STOP RECORD
• Pressing the
record button while in schedule mode will interrupt recording and switch to manual record
• Pressing the
record button again, and it will return you to schedule record mode (if a schedule is set)
START/STOP RECORDING:
Manual Record
To start manual recording press the
recording and resume to schedule mode. To completely stop all recording, you must shut the schedule record off.
Motion Detection Record
Once motion detection has been set in the schedule record section of the menu, the DVR will start recording every
time motion is detected. To completely stop motion detect recording, you must shut the schedule option off.
Continuous Record
Once continuous record has been set in the schedule record section of the menu, the DVR will start recording using the
continuous record settings. To completely stop recording, you must shut the schedule option off.
If there are multiple recording modes set to record at the same time, the DVR will record using one mode, based on
level of importance.
The order of importance is:
1.
Manual Record
2.
Motion Detection
3.
Continuous Record
PI1000
All manuals and user guides at all-guides.com
record button. Pressing the
Note: For more information see Record Setup on Pg 13
record button to start recording. Press once more
record button again will stop manual
7
Publicité
