Publicité
Les langues disponibles
Les langues disponibles
BUTTONS AND CONNECTIONS
2
1. Imitation Motion Sensor
2. Pinhole Camera:
3. Power Switch:
4. SD Card Slot:
5. Video Output Jack (RCA):
6. Power Input:
7. Full Stop/Overwrite Switch:
8. NTSC/PAL Switch:
9. Menu Button:
10. Record & Stop Button:
11. Play & Pause button
12. Reverse & Forward Buttons:
13. Mounting Hole :
14. Flush Wall Mount Holes:
15. Battery Compartment:
Note: If changes are made to NTSC/PAL or Stop/Overwrite functions, you must shut off and restart the
unit before the changes can take effect.
PI1000
All manuals and user guides at all-guides.com
1
3
4
The pinhole camera is located in this small hole
To switch off the power, always press the STOP button first to stop recording,
then switch off the device
Supports SD and SD-HC memory cards
To view footage, use the RCA video output to connect to your television.
Connection to a tv is NOT required for recording.
Connect power cord to device here
Select whether to overwrite the recorded SD card or stop recording
completely when the card is full. When you select "Overwrite", the oldest
stored video will be recorded over first.
NTSC is the video system used in North America. PAL is used in Europe and
parts of Asia.
Opens and exits the menu
Starts and stops recording
Play and pause playback of recorded footage
Allows you to navigate through the menu options, and reverses and
forwards through footage
Attach the mounting bracket here
Allows you to mount the camera directly onto the wall
Camera can be battery powered so the system is completely wireless
7
8
6
5
9
10
11
12
13
14
15
3
Publicité
