wad Helix Black Mode D'emploi page 6

Removal and installation
of the blades
Installation of the blades:
The blade spring (A) must be aligned with the
1
top of the blade (B).
Then fit the two fixed screws and hold
2
them tight.
Tighten the screw with a screwdriver to
3
ensure that the blade head does not fall off.
TIP: Do not disassemble the blade head if you do not
think you are qualified to do so.
10
Cleaning and
Maintenance
Cleaning of the blades:
· Clean the blades with the cleaning brush provided.
Blade maintenance:
· Before or after use, apply a few drops of oil as shown
in the picture.
11