CASARIA Aberdeen 109635 Instructions De Montage page 4

INSTRUCTIONS
Dear Customer,
Thank you for choosing our product. You have made an excellent choice in purchasing one of our
branded products. Our products are regularly inspected to ensure that they meet the desired high
quality standard and, of course, always comply with the stringent requirements of the European
Union.
READ THE SETUP INSTRUCTIONS. IMPORTANT INFORMATION INCLUDED. KEEP FOR
FUTURE USE!
Please read the instructions thoroughly and in their entirety before using the product for the first
time. Keep these instructions for future reference. Should you pass the product on in future, ensure
that you also include these instructions.
CAUTION! POTENTIAL DANGER!
Observe the safety information and setup instructions to avoid the risk of injury or damage to the
product.
RISK OF SUFFOCATION!
Keep small parts and packaging material out of the reach of children!
PRODUCT MODIFICATION
Never make modifications to the product! Modifications will invalidate the warranty and the
product may become unsafe or, in the worst case scenario, dangerous.
GENERAL NOTES
We recommend at least 2 people when assembling larger pieces of furniture.
screws and bolts are securely tightened; do this regularly.
Do not screw the screws in too tightly as the material may become damaged and cracks may
form. Keep small children away during assembly as there is a risk of injury!
Attention! Keep small children away during assembly as there is a risk of injury!
Failure to carry out regular care and maintenance will significantly reduce the life of your product.
We cannot accept any liability for consequential damage resulting from lack of care and
maintenance.
Please note that screws should first be inserted by hand and
tightened only slightly, so that the screws find purchase and loosely
connect the constituent parts.
Do not tighten the screws until all elements are connected in the
correct way. Subsequent tightening of the screws can compensate
for minor discrepancies in drill holes or weld points that can be
present in hand-finished products.
Ensure that this product is fully assembled before use. Check that all
4
EN
www.DEUBAXXL.de