Publicité
Les langues disponibles
Les langues disponibles
Plug in the power cord. Using the control panel or the remote control
(insert batteries first ; see section Replacing the batteries):
Power On/Off
Press the Power On/Off button
to turn the fan on or off. The device
starts at speed 8 by default, in normal mode, with the plasma
sterilization function activated. The digital display shows 8 and the
following LED indicators light up :
Speed
To adjust the speed, press the speed setting button
(the digital
display flashes) then turn the rotary knob to select the speed (from 1 to
24).
1 = low speed 24 = high speed
Dry air function
When powered on, press and hold the speed setting button
for
approximately 3 seconds to activate the dry air function : the device will
then operate at max speed (24) for 20 minutes and the wind speed
indicator
will flash.
When the dry air function is active, except the Power on/off button,
other buttons and functions are invalid.
31
Publicité
