Publicité
Bluetooth BLE
5.3. Bluetooth SPP protocol
1. Scan "Bluetooth SPP" to enter Bluetooth searching (blue light will flash
once the searching has begun).
2. Turn on the Bluetooth in the customized software, search and select
"Barcode Scanner SPP", you will hear a "beep" sound if the pairing is
successful, and the blue light is always on.
Bluetooth SPP
6. 2.4G (dongle)
6.1. 2.4G receiver mode
1. To enter the pairing status, first scan "2.4G Receiver Mode", then scan
"Pairing Setting" (the green light will flash).
2. Plug the USB dongle into the device, when hearing a"beep"sound, it
means the pairing is successful and the blue&green light is always on.
(The whole pairing process takes about 1min, if timeout and the pairing
failed, it will automatically exit the pairing mode);
2.4G receiver mode
Pairing setting
6.2. Virtual serial port mode
Under the circumstances when application software requires ports, scan
"USB Virtual COM" and recognize as USB Virtual COM. (Be advised: An
installed driver is require. The default settings of port is: 9600 baud rate,
8 data bits; no check bit; 1 stop bit).
USB virtual com
9
Publicité
