Momentum VS-3 Manuel D'instructions page 23

COMPASS CALIBRATION
Note: To ensure correct readings, calibration is necessary as local magnetic fields will
affect the performance of the compass function. Calibration is recommend after each
battery replacement.
• In Time mode, press & hold button B to enter the setting menu.
• Use buttons C & D to scroll to the SETTINGS, press E to enter this function.
• Then using buttons C & D, select COMPASS (press E) to proceed with the setting.
• press E to select CALIBRATE
• Hold the watch level and rotate around twice taking approximately 15 seconds per
rotation.
All manuals and user guides at all-guides.com
NOTE: If COMPASS is not reading correctly
after calibration, please RESET as follows:
1) PRESS & HOLD ABCD buttons until
screen "blinks", then release;
2) PRESS & HOLD (E) COMP button for
5 seconds then release: watch will restart
and display 12:00
3) Recalibrate the compass as shown
above and reset time, date, etc...
23