HURAKAN HKN-MP160 Mode D'emploi page 23

5. CONTINUED OPERATION MODE
Follow the above steps 4.1.through 4.5.
5.1. While the switch button (No. 3) is released, press the fixing button (No. 4).
5.2. Press the switch button (No. 3), the blender shall switch to the continued operation
mode.
5.3. To stop, press and release the switch button (No. 3).
6. ROTATION SPEED CONTROL
To change the rotation speed, turn the adjusting button (No. 2) to the required value.
ATTENTION!
When using the whisk, it is recommended to start from setting the adjusting button to the
maximum.
7. RECOMMENDATIONS FOR USE
Using the blade: to control the blender to the fullest, hold its handle with one hand and the
motor unit bottom with the other hand. The optimal way is to keep a slight tilt and to avoid
touching the container, where the food is being processed. Always check that the extension
tool is immersed sufficiently, to avoid splashing and make sure moisture or liquid does not
penetrate the motor unit and ventilation openings. To achieve optimal efficiency, submerge
of the extension tool are into the processing food.
Using the whisk: keep the handle of the equipment with one hand and the container (bowl
etc.) with the other hand, if necessary. It is recommended to go with the whisk along the
container circumference while processing, for the best dissolving effect. It is highly recom-
mended avoiding touching the container edges with the whisk. To achieve the optimal effi-
ciency, submerge at least 1/5 of the whisk into the processing food being. Never submerge
the whisk up to the junction or above!
8. REMOVING AND INSTALLING EXTENSIONS
ATTENTION! Extensions shall be installed and removed only with the equipment discon-
nected from the power supply mains.
For HKN-MP160 and HKN-MP160 Combi:
8.1. Carefully insert and connect
the fastening (5) of the blade
(3) or whisk (6) to the junc-
tion (2) of the blender case
(1).
8.2. Turn the blade (3) or whisk
(6) to fix it.
All manuals and user guides at all-guides.com
EN
23