Publicité
and place the Motor Base in a well-ventilated
and place the Motor Base in a well-ventilated
area, allowing it to cool down for 45 minutes.
area, allowing it to cool down for 45 minutes.
Try removing some of the ingredients before
Try removing some of the ingredients before
continuing to blend.
continuing to blend.
Make sure the Lid is closed tightly during
Make sure the Lid is closed tightly during
•
•
blending to prevent liquid from splashing out.
blending to prevent liquid from splashing out.
Keep hands and utensils out of the Pitcher while
Keep hands and utensils out of the Pitcher while
•
•
the motor is running to prevent injuries
the motor is running to prevent injuries
or damages.
or damages.
When making sauces, stuffing, etc., add 2–3 cups
When making sauces, stuffing, etc., add 2–3 cups
•
•
of ingredients at a time. Keep the blending
of ingredients at a time. Keep the blending
time below 2 minutes to prevent the motor
time below 2 minutes to prevent the motor
from overloading or overheating. If the motor
from overloading or overheating. If the motor
stops abruptly, allow the motor temperature to
stops abruptly, allow the motor temperature to
decrease before continuing to blend.
decrease before continuing to blend.
Always place soft or liquid ingredients in the
Always place soft or liquid ingredients in the
•
•
blender before adding hard ingredients
blender before adding hard ingredients
or ice cubes.
or ice cubes.
Wait until the blades come to a complete
Wait until the blades come to a complete
•
•
stop before removing the Pitcher. If not done
stop before removing the Pitcher. If not done
accordingly, the drive gear may
accordingly, the drive gear may
become damaged.
become damaged.
If a burning odor comes from the Blender,
If a burning odor comes from the Blender,
•
•
shut the appliance off immediately. This may be
shut the appliance off immediately. This may be
caused by abrasion of the rubber feet on the
caused by abrasion of the rubber feet on the
Motor Base. Make sure that the rubber feet are
Motor Base. Make sure that the rubber feet are
stable and that the appliance is
stable and that the appliance is
properly assembled.
properly assembled.
If the blades become jammed during the
If the blades become jammed during the
•
•
blending process, use the Tamper to stir the food
blending process, use the Tamper to stir the food
in the Pitcher, allowing air to escape. Close the
in the Pitcher, allowing air to escape. Close the
Lid tightly and continue to blend.
Lid tightly and continue to blend.
IMPORTANT SAFEGUARDS: PLEASE READ AND
SAVE THIS INSTRUCTION AND CARE MANUAL.
important safeguards
When blending tough or sticky foods, begin
When blending tough or sticky foods, begin
•
•
blending at a low speed. If the blender does
blending at a low speed. If the blender does
not mix the ingredients to your preference,
not mix the ingredients to your preference,
disconnect the appliance and use a spoon
disconnect the appliance and use a spoon
or spatula to incorporate the ingredients and
or spatula to incorporate the ingredients and
release any captured air in the Pitcher. Close the
release any captured air in the Pitcher. Close the
Lid and continue blending.
Lid and continue blending.
This appliance is not intended for use by
This appliance is not intended for use by
•
•
persons (including children) with reduced
persons (including children) with reduced
physical, sensory, or mental capabilities, or
physical, sensory, or mental capabilities, or
lack of experience and knowledge unless they
lack of experience and knowledge unless they
are provided with supervision and instruction
are provided with supervision and instruction
concerning the use of the appliance by a person
concerning the use of the appliance by a person
responsible for their safety.
responsible for their safety.
StoreBound shall not accept liability for damages
StoreBound shall not accept liability for damages
•
•
caused by improper use of
caused by improper use of
the appliance.
the appliance.
This appliance has a polarized plug (one blade
This appliance has a polarized plug (one blade
•
•
is wider than the other). To reduce the risk of
is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized
electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not
outlet only one way. If the plug does not
completely fit in the outlet, reverse the plug. If it
completely fit in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
Do not attempt to modify the plug in any way.
For household use only.
For household use only.
•
•
∙ 5 ∙
Publicité
