Publicité
Before cleaning or moving the appliance, make sure to unplug the Blender.
•
Remove the Pitcher from the Motor Base.
•
Empty any contents from the Pitcher.
•
To remove the Blade, turn the Blade Lock clockwise until you can lift the Lock out of place.
•
Then carefully remove the Blades and Blade Seal (see pages 18-19).
Hand wash only.
•
If you prefer you can wash the Pitcher in the sink with hot, soapy water, using a brush to clean the Blade.
•
Dry the base of the Pitcher thoroughly.
•
Wipe down the Motor Base with a damp cloth.
•
If you removed the Blade Assembly for cleaning, reinsert the parts in the opposite order they were
•
removed, and firmly screw the Blade Lock counterclockwise back into place.
When you are storing the Pitcher for an extended period of time, store it upside down, without the Lid,
•
to allow any residual moisture to evaporate.
IMPORTANT:
DO NOT SUBMERGE THE MOTOR BASE IN WATER OR OTHER LIQUIDS.
•
cleaning & maintenance
∙ 21 ∙
Publicité
