Conrad 1D Mode D'emploi page 4

Operation with the Windows
• Start the app "Generalscan ScanWedge for ScanBuddy".
• As soon as the app is opened, select the correct COM port. You can find it in the device
manager of Windows 8.1. The respective device you will find under Connections has the
®
name "STMicroelectronics Virtual COM Port".
• Then tap the "Open Port" button.
• As in the Android™ App, you can again show or hide a button on the desktop, with which you
can directly activate the scanner. The trigger button can be moved anywhere on the desktop.
To show it, press "Enable Trigger Button", to hide it press "Hide Trigger Button".
You can make further settings under "Trigger Button Settings".
• To scan in the app, tap "Manual Trigger" and then swipe the scanner over the barcode to read
it.
The barcode is shown again in the app and copied into the clipboard.
Maintenance and cleaning
The product is maintenance-free. The product contains no parts that require servicing. There-
fore, do not open it.
Use a clean, dry and soft cloth for cleaning. If the device is very dirty, use a cloth slightly mois-
tened with lukewarm tap water.
Clean the product very carefully; otherwise you may scratch it.
Do not use abrasive cleaning agents, rubbing alcohol or other chemical solutions
under any circumstance; thereby you may damage the casing or even impair opera-
tion.
Disposal
The product must not be disposed of in household waste!
Dispose of the waste product in accordance with the applicable legal regulations.
Technical data
Operating voltage ......................... 5 V/DC ±0.15 V
Power supply ................................ via USB
Current consumption (operation) .. max. 165 mA
Current consumption (standby) .... max. 115 µA
Connection ................................... Micro-USB plug; OTG
Scanner type ................................ 1D
Sensor .......................................... Linear CCD
Lighting ......................................... LED, 630 nm ±30 nm
Field of view .................................. 53.3 ° ±3 ° (horizontal), 0.4 ° (vertical)
Scan angle .................................... ±30 °; ±65 °; ±25 °
Scanning rate ............................... max. 50 scans per second
Dimensions (W x H x D) ............... approx. 46 x 12.8 x 37.8 mm (with protective cap)
Dimensions (W x H x D) ............... approx. 46 x 12.8 x 30 mm (without protective cap)
Weight .......................................... approx. 12.8 g (incl. protective cap, without accessories)
Operating conditions ..................... -20 °C to +50 °C
Storage conditions ........................ -40 °C to +70 °C
Relative humidity .......................... 5% to 95%, not condensing
Supported barcodes ..................... EAN-8, EAN-13, UPC-A, UPC-E, ISSN, ISBN, Codabar,
Code 11, Code 39, Code 93, Code 128, UCC/EAB-128;
AIM 128, ITF-6, ITF-14, Interleaved 2 of 5, Matrix 2 of 5,
Industrial 25, Standard 25, MSI-Plessey, Plessey, GS1
Databar
Supported devices ........................ Android
from version 5.2 with OTG support; Windows
64 Bit) (only Windows
app All manuals and user guides at all-guides.com
®
(RSS) (RSS-14, RSS-Limited, RSS-Expand)
TM
from version 4.1 with OTG support; Android
TM
tablets with micro-USB connection)
®
TM
8.1 (32 and
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2016 by Conrad Electronic SE.