Publicité
LITHIUM*
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers red clamp connected
to the battery's positive pole? Connect
the charger according to the
vehicles manual.
2. Is the charger connected to a 12V
battery?
3. Are the clamps short circuited?
4. Has charging been interrupted in
MODE
?
Restart the charger by pressing the MODE-
button. If charging is still being interrupted, the
battery...
...can not accept charge or paralell loads
may be connected to the battery. Remove the
NORMAL LITHIUM
SUPPLY
RECOND
paralell loads and restart the charging by
pressing the MODE-button.
...restart the charger maximum 3 times. If the
charger doesn´t continue to Bulk after that,
the battery may need to be replaced.
...can not keep charge and may need to be
replaced.
*) 12V lithium batteries (LiFePO
All manuals and user guides at all-guides.com
or
, Li-Fe, Li-iron, LFP)
4
READY TO USE
The table shows the estimated time to charge a battery from
empty to 80%
BATTERY SIZE (Ah)
40Ah
100Ah
200Ah
300Ah
TIME TO 80% CHARGED
PRO25S
1.5h
3h
6h
16h
EN • 13
Publicité
