Publicité
LITHIUM*
CHARGING PROGRAMS
Settings are made by pressing the MODE-button. After about two seconds the charger activates the selected program. The
selected program will be restarted next time the charger is connected.
The table explains the different Charging Programs:
Program
Lithium* program 13.8V/25A
LITHIUM
Use for LITHIUM* batteries.
Supply program 13.6V/25A
Use as a 12V power supply or use for float maintenance charging when 100% capacity of the battery
SUPPLY
is required. The Supply program activates the Float step without time or voltage limitation.
protection on the battery charger is disabled during the SUPPLY program.
*) 12V lithium batteries (LiFePO
All manuals and user guides at all-guides.com
, Li-Fe, Li-iron, LFP)
4
Explanation
The spark
EN • 11
Publicité
