Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Warning!
To avoid injury, if any parts are missing, do not attempt to assemble the machine, do not plug in the power cord, do not turn the switch
on until missing parts are obtained and installed correctly.
Installation
Warning!
Do not lift the saw without help.
The saw is too heavy to lift without help, customers should seek assistance from staff to lift this machine.
After unpacking, install all the loosen parts on the main body in according to the explosion drawing on the manual. Make sure all the
loosen parts correctly installed.
Turn the folding legs(A) out, and lock it in position with ratchet lever (B).
Installing the working handle
Fit the working handle( C) onto the fixed blade guard and tighten it with 2-M8x30 hex head screws(D).
Replacing the Saw Blade (Disc)
Warning!
Make sure the switch is off, and your saw is unplugged in power supply. Failure to do so could result in serious personal injury.
Remove 3 wing screws( E), and remove the blade guard.
Remove the blade lock nut(lefthand thread) with 2 spanners (supplied 30mm & 12mm).
18
Publicité
