Chapter 1: Connections and Setup
HDSTB Connection
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.
However, if you do receive Digital signals from a digital set-top box or other digital external device, refer
to the figure as shown below.
When connecting with a D-Sub 15 pin cable
A A
Digital Set-top Box
(R) AUDIO (L)
Rear panel of the set
When connecting with a HDMI to DVI cable
A A
Digital Set-top Box
DVI-DTV OUTPUT
(R) AUDIO (L)
Rear panel of the set
24
1. Connect the RGB output of the digital set-top
RGB-DTV OUTPUT
2. Connect the audio outputs of the set-top box to
3. Turn on the digital set-top box.
4. Select VGA input source using the INPUT button
5. Refer to the digital set-top box manual for oper-
1. Connect the DVI output of the digital set-top box
2. Connect the audio outputs of the set-top box to
3. Turn on the digital set-top box.
4. Select HDMI1 input source using the INPUT but-
5. Refer to the digital set-top box manual for oper-
box to the RGB IN (PC) jack on the set.
the AUDIO IN (RGB/DVI) jack on the set.
on the remote control.
ating instructions.
to the HDMI/DVI IN 1 jack on the set.
the AUDIO IN (RGB/DVI) jack on the set.
ton on the remote control.
ating instructions.
Chapter 1