Publicité
Les langues disponibles
Les langues disponibles
"SLEEP" FUNCTION
- The function can only be accessed from the remote control
- In "Air conditioning" mode, the ventilation switches to slow speed. The temperature
increases by 1 ° C after the 1
maintain this temperature.
- When the sleep function is selected, the brightness of the control panel is reduced
Note: the "Sleep" function is only available in "Air conditioning" mode (it does not
work in "Ventilation" or "Dehumidification" mode).
FULL TANK "Ft"
- The display shows Ft lights up and a beep sound, this means that the internal water tank
needs to be emptied. (Point I)
Place a container under the stopper to collect the water.
(1)
Remove the rubber stopper and let the water drain out.
(2)
Push the plug back into the drain.
(3)
REMOTE CONTROL
-Works with 2 AAA batteries, 1.5 volts, not included. Used batteries should be disposed of safely.
Place them in the collection bins provided (check with your dealer) in order to protect the
environment.
-Respect the polarities by inserting them.
- Direct it towards the air conditioning control panel.
time
hour, then increase again by 1 ° C after 2 hours, then
Increase / decrease the temperature or the timer
1.
duration
Air conditional mode
2.
Dehumidification mode
3.
Ventilation mode
4.
Switch between temperature indication in degrees
5.
Celsius or Fahrenheit
Sleep function
6.
On / Off
7.
Fan speed
8.
Timer
9.
EN-22
Publicité
