BASETech 1528592 Mode D'emploi page 3

Operating instructions
Surface-mounted PIR motion detector 240°
Item no. 1528592 grey
Item no. 1528593 white
Intended use
The surface-mounted PIR (Passive Infra-Red) motion detector monitors the area in front of the
sensor continuously. The device turns on connected lights automatically as soon as movement
is detected. If no other motion is detected within the monitoring area, lights are turned off after
a preset time delay. The lights remain on, however, if movements are still detected. The motion
detector is suited for energy-saving lighting of stairways, home entrances, basements, poorly
lit courtyards or other environments where automatic lighting is useful. Automated lighting is
recommended for working, ergonomic or safety reasons. The surface-mounted motion detector
is designed to switch household lighting on and off depending on the surroundings.
Use other than that described above can lead to damage to the product and may involve
additional risks such as, for example, short circuits, fire, electrical shocks etc. No part of the
product may be modified or reconfigured. Read the operating instructions carefully and keep
them for later reference. If you pass the product on to a third party, please hand over these
operating instructions as well.
The safety instructions should be observed without fail!
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Surface-mounted PIR motion detector
• 2x screws
• 2x dowels
• Sticker set (type plates)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important information in these operating
instructions which must be observed without fail.
The arrow symbol is used when specific tips and information on the operation are
provided.
This product has been CE-tested and meets the necessary European guidelines.
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We assume no liability for damage to property or
personal injury caused by failure to observe the operating instructions and
the safety instructions or by improper handling! In such cases, the warranty
will be null and void!
Dear customer,
the following safety instructions are intended not only for the protection of your
health, but also for the protection of the device. Therefore, please read this chapter
very carefully before using the product for the first time!
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use.
All manuals and user guides at all-guides.com
Selecting the mounting position - Installation instructions
Observe the following installation instructions for a satisfactory performance:
• The mounting height of the motion detector should be between 1.8 m and 2.5 m (6 ft and 8 ft)
• To prevent false - positive triggering of the lighting (unintended switching on), avoid a position
• Electromagnetic fields can also trigger an unwanted activation of the motion detector. Electri-
• Do not choose a location for the motion detector where highly reflective surfaces are in paral-
• The motion detector responses more quickly to movements which run parallel through the
• Choose an installation height that prevents unauthorised third parties from arbitrarily chang-
• The sensor range of the motion detector is dependent on weather-dependent and temper-
• Before drilling holes, check that no cables or wires running underneath or adjacent to it can
Installation
Before installing the PIR motion detector, observe the directions provided in "Selecting the
mounting position - Installation instructions" and, if necessary, test the position prior to the
definite installation.
• Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• Make sure that the lights which are automatically turned on and off do not pose
any danger to, or impact on the environment or traffic.
• Never pour liquids on electrical devices, and never place any liquid-containing
objects (such as vases) on top of them or near them. You run the high risk of caus-
ing a fire or a fatal electric shock.
• Observe the regulations for IP44 protection.
• Do not wear any metallic or conductive jewellery such as chains, bracelets, rings,
etc. when working with power adapters or chargers. Never under any circum-
stances connect power adapters and chargers to humans or animals.
• Be extremely careful when dealing with mains voltage (230 V/AV). Contact with
live parts can result in a life-threatening electric shock!
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If in doubt about how to connect the device correctly, or should any questions arise
that are not answered in these operating instructions, please contact our technical
service or another specialist.
above the monitoring range.
where the sensor opening points towards heat sources. Grills, air-conditioning units, cars or
fireplaces are examples of heat sources that emit infrared and changing radiation.
cal hot plates or motors, for example, generate electromagnetic fields.
lel to the (matte transparent) sensor surface. These include water surfaces, smooth white
walls, windowpanes and mirrors.
sensor area or parallel to the matte sensor surface. Movements towards the device or away
from the device will increase the response time and decreases the detection range.
ing the device settings.
ature-sensitive and may change slightly. However, the maximum range of 12 m / 240° is
ensured at 25 °C with dry air conditions. Be sure to mount the motion detector at the specified
height and at a suitable location in order to take advantage of the maximum range the motion
detector offers. The motion detector should not be in line with walls, projections, corners, etc.
be damaged.
OFF
Be careful not to short-circuit the input and output lines. Keep the cables separate. If
necessary, use the terminal strip supplied. Switch off the power supply before mak-
ing any connections, and secure against being unintentionally switched on again.
Black (PIR Wire)
Black (Lamp Wire)
Blue (Lamp Wire)
Blue (PIR Wire)
Blue (Power Cable)
Brown (PIR Wire)
Brown (Power Cable)
Cable hole