Télécharger Imprimer la page

Imetec N9206 Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Styling nozzle (6A)
Use the styling nozzle to direct the air jet as you wish.
Diffuser (6B)
If the appliance comes with a diffuser, replace the styling nozzle to
add volume to your hair.
Recommendations: The diffuser is only to be used on damp hair in
order to obtain a natural hair style or a natural drying effect:
Take a lock of hair and twist it in the diffuser. Make sure that even
the ends are entered.
Then switch the hair dryer on at medium speed and maximum
temperature to dry your hair.
For greater volume:
Switch the hair dryer on at minimum speed and temperature.
Place the diffuser directly on your hair and move it from the bottom
upwards, as though you wanted to lightly massage your scalp.
IMPORTANT: use only the original accessories of the appliance.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
Refer to the figure in the illustrative guide of the instructions for use.
Appliance with separate keys for air flow (3A) and temperature
(3B). The two keys set air flow and temperature separately at the
following levels:
Air flow button (3A)
0 = OFF
1 = medium air flow
2 = strong air flow
Cold air shot button (3C)
If the appliance is equipped with this button, it can be used to set the
styling.
• If this button is pressed while the appliance is on, the hot air cools
down and the set style lasts longer.
USE
Temperature button (3B)
1 = low temperature
2 = medium temperature
3 = high temperature
13
EN

Publicité

loading