Nicols PAR COB 70 W Notice D'utilisation page 10

MAIN FONCTIONS
1. BUILT-IN PROGRAMS
Press "MODE" until the LED display shows PRO (menus: LED fading speed + LED strobe speed)

Press a few seconds on "MODE", when LED display shows a signal starting with
the button. Use buttons "UP" or "DOWN" to adjust the fading speed:
"MODE" to go back to the previous menu

Press a few seconds on "MODE", when LED display shows a signal starting with
the button. Use buttons "UP" or "DOWN" to adjust the strobe speed:
"MODE" to go back to the previous menu
2. MONOCHROME DIMMING
Press "MODE" until the LED display shows

Press a few seconds on "MODE", the LED display will show
Use "UP" or "DOWN" to adjust the brightness. Press "MODE" to go back to the previous
menu

Press a few seconds on "MODE", when the LED display shows a signal starting with
release the button. Use "UP" or "DOWN" to adjust the strobe speed:
"MODE" to go back to the previous menu
3. DMX MODE
Press "MODE" until the LED display shows
The fixture can automatically identify the DMX signal. If the signal is well received, the third digit of LED
display will flash. If the DMX signal disappears, the previous mode will be restored.

Press a few seconds on "MODE", when the LED display shows
Use "UP" or "DOWN" to adjust the DMX address. Press "MODE" to go back to the previous
menu

Press a few seconds on "MODE", when the LED display shows
button. Use "UP" or "DOWN" to adjust current DMX mode. Press "MODE" to go back to
the previous menu
(menus: LED brightness + LED strobe speed)
000-255
(menus: DMX address + DMX mode)
000-255
1.CH
5
, release
5.01-5.FL
. Press
F
, release
F.00-F.99
. Press
, release the button.
F
,
F.00-F.99
. Press
, release the button.
2.CH
or , release the