Perel VTUSC2 Mode D'emploi page 4

Damage caused by disregard of certain
•
guidelines in this manual is not covered by the
warranty and the dealer will not accept
responsibility for any ensuing defects or
problems.
Do not disassemble the cleaner. There are no
•
user-serviceable parts.
Never clean the tank with abrasive or corrosive
•
chemicals.
Unplug the cleaner from the mains before
•
filling up the tank. Fill the tank up to the limit
level only.
Make sure that the available voltage does not
•
exceed the voltage stated in the specifications
of this manual.
If the supply cord is damaged, it must be
•
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
Disconnect the device from the mains to clean
•
it or when it is not in use. Handle the power
cord by the plug only. Avoid touching the
power cord with wet hands.
Only use the cleaner when the tank is filled
•
with water.
Never leave the cleaner unattended when
•
plugged in.
Keep the cleaner away from heat sources such
•
as radiators. Operate on a dry and level
surface.
Do not immerse the cleaner.
•
V. 05 – 26/10/2021
VTUSC2
4 ©Velleman Group nv