Spare Parts - MONDELIN DIABLE AXIS Notice D'utilisation

EN
CHARACTERISTICS
Multi-purpose hand truck, with fixed and folding platforms that can be locked with a pin
Pneumatic wheels Ø 254 mm
Curved and closed handles for easy handling in all positions and for horizontal laying
Loading possible in horizontal position
DO NOT USE THE HAND TRUCK BEYOND THE MAXIMUM LOAD OF
USE : 250Kg
This maximum working load (250 Kg) is set in relation to the mechanical characteristics of the hand truck. It
can not be a substitute for the directives set out in standard NFX 35-109 concerning ergonomics and manual
handling of loads, or the manual handling regulations contained in the Labor Code (articles R4541-1 to
R4541-10)
USING RULES
Before any use of the hand truck, the regulation imposes a test of adequacy to make sure that the hand truck
is adapted to the transport to realize.
The use of the hand truck requires having read the contents of its instructions for use.
The fety rule mentioned in the h nd truck' m nu l mu t be re pected.
Wheel pressure must be checked (2bars).
The load must be properly loaded and perfectly balanced on the base of the hand truck.
Be sure to wear gloves and safety shoes when using the hand truck.
When using the hand truck, it is better to push the load than to pull it.
IT IS FORBIDDEN :
To use the hand truck for the transport of person.
To use the hand truck if it is defective
.
MAINTENANCE
Any modification of the hand truck, including for use other than that provided by the manufacturer is
prohibited.
Establish a periodic check of the equipment, after each operation, in a succinct manner and by further
examination before prolonged use.
If a part is degraded, replace it with an original part or discard the hand truck.

SPARE PARTS

Kit 1 free wheel + brace + pin REF. 601018