Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCES
Note!
• Programme setting for testing in accordance with applicable standard
En60456 for wash.
• Programme setting for testing in accordance with applicable standard
En50229 for wash and dry.
• When using the test programmes, wash the specified load using the
maximum spin speed.
• The actual parameters will depend on how the applicance is used,and
maybe different with the parameters in above mentioned table.
• The household washing machine is equipped with power management
system.The duration of the left-on mode time is less than 10 minute.
• The noise emissions during washing/spinning for the standard washing
cycle at full load.
Remarks:
The energy efficiency class is from A(highest efficiency) to D (lowest efficiency)
❶
Energy consumption per year, based on 220 standard washing cycles for
❷
standard programme at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend
on how the appliance is used.
Water consumption per year based on 220 standard washing cycles
❸
for standard programme at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
Spin-drying efficiency class from G (least efficient) to A (most efficient).
❹
❺
The standard 60°C programme and the standard 40°C programme are the
standard washing programmes. These programmes are suitable to clean
normally soiled cotton laundry and they are the most efficient programmes in
terms of combined energy and water consumptions for washing that type of
cotton laundry. The actual water temperature may differ from the declared
cycle emperature.
Please choose the suitable type of detergent for the various washing
temperatures to get the best washing performance with less water and energy
consumption.
All manuals and user guides at all-guides.com
30
V.4
Publicité
