DeLOCK 91734 Mode D'emploi page 3

English
Package content
• OTG USB 5 Gbps Card Reader
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Using on mobile device:
1.
Connect the adapter to the Micro USB port of your OTG
device.
2. "USB connector connected" will appear on the display.
3. You can now insert the memory card into the suitable slot, by
pushing it slightly. The blue LED lights up when the memory
card is recognized.
4. "USB mass storage connected" will appear on the display.
5. Enter the menu and go to Applications > "My Files" > "All files"
> "UsbDriveA" or "USB storage A", where you can find all data
files of your memory card.
6. In order to remove the memory card, just pull it out from the
slot.
Using on PC:
1. Connect the adapter to a free USB Type-A port of your PC.
2. You can now insert the memory card into the suitable slot, by
pushing it slightly. The blue LED lights up when the memory
card is recognized.
3. Now you can access to the memory card via your PC.
4. In order to remove the memory card, just pull it out from the
slot.
Note: Please note that only storage media in FAT32 format can be
recognized.
-3-