Urmet 1039/81 Mode D'emploi page 5

All manuals and user guides at all-guides.com
INSTALLATION
The special decoder presents four holes for wall fastening by means of 6 mm diameter bolts (not provided).
The decoder can be wall fi tted with the wires either embedded or not.
Important: In both cases, the relays will directly control the high voltage loads. The wires connected to the
relays terminal block must pass in separate channel with respect to the rest of the system.
DUCT + WIRES
COVER FRAME WALL COVER FRAME
DUCT + WIRES WALL
For the device programming please refer to the IPerVoice System manual.
5
DS1039-049C