Publicité
Les langues disponibles
Les langues disponibles
Installing the Monitor
The monitor base has two holes for fixing screws. As an alternative to securing with
screws, the enclosed Velcro can be used to secure the monitor where it is to be used.
Connection
Proceed as follows to make the correct connections:
• Connect the video output of your camera with „Video input" (8) of the monitor.
• Connect your camera to the voltage supply and switch it on, if necessary.
• Connect the low voltage plug from the 12V/DC power transformer with the „power
supply connector" (9) on the monitor.
• Plug the power transformer into a standard domestic mains socket (230 V/AC 50 Hz).
Switching the monitor on and off
Press the „ON/OFF" button (3), to switch the monitor on or off.
Button functions
„Image adjustment" button (4)
Press this button to rotate the image in the „display" (2).
„Colour adjustment" button (5)
The hue can be adjusted using the „Colour adjustment" button (5).
„Brightness adjustment" button (6)
Sets the image brightness.
„Contrast adjustment" button (7)
Button for adjusting the image contrast.
Maintenance and Cleaning
Before cleaning the outside of the monitor, unplug it from the mains.
To clean the outside of the monitor, a dry, soft and clean cloth is sufficient.
Clean the display very carefully, otherwise you may scratch it. Do not press too hard
on the display. Do not use any aggressive cleaning agents.
Disposal
Electrical and electronic products do not belong in the household waste!
Please dispose of the device, when it is no longer of use, according to the
current statutory requirements.
Technical Data
a) Monitor
Operating voltage:
Current consumption:
Display format:
Dimensions:
Weight:
Operating temperature:
b) Wall plug transformer
Input voltage:
Output voltage:
All manuals and user guides at all-guides.com
12 V/DC
max. 350 mA
320 RGB x 240
approx. 71 x 101 x 28 mm (without base)
approx. 132 grams (with base)
-10°C to +50°C
230V/AC 50 Hz
12V/DC (350 mA)
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data pro-
cessing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2010 by Conrad Electronic SE.
Publicité
